Build your kit yourself.

Pick your strip by the metre, your parts, your controller and your power supply. The page works out the power of your setup and tells you which supply it needs.

In stock · COB strips on pre-order

Pick your shipping province: its sales tax is added at checkout.

Step 1

The strip

Standard (WS2815 12 V, 30 LEDs per metre, waterproof) or COB (12 V, 20 zones per metre, one continuous line with no dots), from 1 to 5 m. You can add several strips.

COB strip on pre-order · Pre-order, ships by November 12, 2026

Strip Quantity

Step 2

The parts

A bracket about every 30 cm, a corner per angle, a joint between two pieces of strip.

3D-printed bracket with wire pass-through Printed here, holds the strip and guides the wire$1.50

Corner (angle jumper) To turn a corner without bending the strip$2.00

Joint (connector between two pieces) To join two pieces of strip$2.00

Step 3

The controller

Controller only $69.00 The Link Your Light controller with its cable, for your own addressable LED strip (WS2815 12 V, WS2812B or SK6812 5 V). Up to 2000 LEDs. You pick the strip type and the number of LEDs in the app. Goal signal season included. Uncheck it if you already have a Link Your Light controller.

Step 4

The power supply

A 12 V supply certified for Canada, chosen from the power of your strips (10 W per metre of standard strip, 12 W per metre of COB, with a 25% margin).

For 3 m of standard strip (30 W), you need a 5 A power supply.

12 V 5 A power supply $39.00Recommended Certified for Canada

12 V 8 A power supply $69.00 Certified for Canada

12 V 10 A power supply $79.00 Certified for Canada

12 V 15 A power supply $99.00 Certified for Canada

I already have a 12 V power supply Make sure it delivers at least the current the rule above asks for.